[ECS/Fargate] 別のAWSアカウントにあるCodeCommit Repository をソースとするCodePipelineをCloudFormationで構築してみた

[ECS/Fargate] 別のAWSアカウントにあるCodeCommit Repository をソースとするCodePipelineをCloudFormationで構築してみた

Clock Icon2021.04.04

この記事は公開されてから1年以上経過しています。情報が古い可能性がありますので、ご注意ください。

はじめに

おはようございます、もきゅりんです。

皆さん、クロスパイプラインしてますか? (初めて使いました)

本稿では、クロスアカウントの CodePipeline を構築します。

別のAWSアカウントにある CodeCommit Repository へのブランチプッシュをイベントフックに Fargate Blue/Green デプロイを実行します。

別のAWSアカウントにあるCodeCommit RepositoryをソースとするCodePipelineをCloudFormationで構築してみた | DevelopersIO の ECS / Fargate 版になります。

CodePipelineでアカウントをまたいだパイプラインを作成してみる | DevelopersIO も参考としました。

合せ技になります。

元ネタは 他の CodePipeline アカウントのリソースを使用するパイプラインを AWS に作成する - AWS CodePipeline になります。

これらに付け加えて、本稿では、CodeCommit の任意のブランチプッシュをイベントフックとしたデプロイにしたいので、AWS アカウント間のイベントの送受信 - Amazon EventBridge を参考に EventBridge (CloudWatchEvent) の設定を CloudFormation で行っています。

やりたいこと

下図のような構成を CloudFormation で構築します。

今回は、Fargate のB/G デプロイのパターンのうち、プレースホルダを利用をしたもので実行します。

cross_account_codepipeline

設定の詳細内容は、上に挙げた2つのブログで記載されているため、ここでは割愛しますが (いろいろと設定が出てくるのですが) 、大まかにやっていることを掴むには、下記 3つを意識すると良いと思います。

  1. パイプラインを持つアカウント側でカスタマーマネージドの CMK が必要なこと
  2. 両アカウント間のデプロイを通じて使用されるリソースが、上記のキーを利用できるようにすること
  3. パイプラインが別アカウントに存在する必要なリソースを利用できるようにすること

両アカウント間のデプロイでどのリソースを使うのか?どのリソースがどのリソースにアクセスするのか?を把握して、上の1~3と見比べると掴みやすいかと思います。

今回の例でまとめると、下表のようになります。

アカウント リソース 要件
A S3 (アーティファクトバケット) CodePipelineと同じアカウント
A CMK CodePipeline と同じリージョンでカスタマーマネージドキーを作成
B CodeCommit 別アカウントの S3バケット、そのオブジェクトの暗号化に使うKMSの暗号化キーにアクセスできること
A CodeBuild S3バケット、そのオブジェクトの暗号化に使うKMSの暗号化キーにアクセスできること
A CodeDeploy S3バケット、そのオブジェクトの暗号化に使うKMSの暗号化キーにアクセスできること
A CodePipeline 別アカウントの CodeCommit を利用できること
B CloudWatchEvent 別アカウントへ Event に送信すること
A CloudWatchEvent 別アカウントからの Event を受信できてターゲットを実行する こと

やること

ここは、別のAWSアカウントにあるCodeCommit RepositoryをソースとするCodePipelineをCloudFormationで構築してみた | DevelopersIO の流れとほぼ同様です。

A,Bそれぞれのサフィックスは実行する環境を示します。

  1. IAMロールやポリシーの事前準備 (A)
  2. CodeCommit と CloudWatchEvent の設定 (B)
  3. ECS / Fargate の Blue / Green デプロイを構築 (A)
  4. CI/CD Pipeline and Environment と CloudWatchEvent の設定 (A)

前提

  • CodeCommitが作成済み (B)
  • ECRにリポジトリがあること (A)
  • 承認ステージで使用するSNSは作成済みであること(A)

必要なパラメータ

何が必要か分からなってくるので、パラメータをまとめておきました。

取得タイミングはテンプレート実行回数を表します。

(下表は別アカウントのリポジトリを利用するコードパイプラインを構築する準備で必要なパラメータです。B/Gデプロイやパイプライン構築では別途さらにVPCやサブネット、コンテナ名などのパラメータが必要になります。。)

取得タイミング パラメータ
0 ProductionAccountId
0 RepositoryAccountId
0 CodeCommitRepositoryArn
1 CodeBuildRole
1 CodeDeployRoleArn
1 CmkArn
1 CodePipelineRoleArn
1 S3BucketArn (ArtifactBucketName)
2 CodeCommitRoleArn

1. IAMロールやポリシーの事前準備 (A)

パイプライン側のAWSアカウント(A)でパイプラインが利用する IAMロール、アーティファクトS3バケット、CMKなどを作成します。

リポジトリアカウント(B)に対してアーティファクトに保存する権限、保存する際に暗号化するための権限をポリシーに設定しています。

AWSTemplateFormatVersion: 2010-09-09
Description: Step 1, Pre-requirements (in Production Account)
# ------------------------------------------------------------#
# Parameters
# ------------------------------------------------------------#
Parameters:
  RepositoryAccountId:
    Description: Repository Account ID
    MaxLength: 12
    MinLength: 12
    Type: String
# ------------------------------------------------------------#
# Resources
# ------------------------------------------------------------#
Resources:
  PipelineRole:
    Type: AWS::IAM::Role
    Properties:
      AssumeRolePolicyDocument:
        Version: 2012-10-17
        Statement:
          - Effect: Allow
            Principal:
              Service:
                - codepipeline.amazonaws.com
            Action:
              - sts:AssumeRole
      Path: /
      Policies:
        - PolicyName: Pipeline
          PolicyDocument:
            Version: 2012-10-17
            Statement:
              - Effect: Allow
                Action:
                  - sts:AssumeRole
                Resource:
                  - !Sub arn:aws:iam::${RepositoryAccountId}:role/* # Cross Account Access
              - Effect: Allow
                Action:
                  - iam:PassRole
                Resource:
                  - '*'
                Condition:
                  StringEqualsIfExists:
                    iam:PassedToService:
                      - cloudformation.amazonaws.com
                      - elasticbeanstalk.amazonaws.com
                      - ec2.amazonaws.com
                      - ecs-tasks.amazonaws.com
              - Effect: Allow
                Action:
                  - codedeploy:CreateDeployment
                  - codedeploy:GetApplication
                  - codedeploy:GetApplicationRevision
                  - codedeploy:GetDeployment
                  - codedeploy:GetDeploymentConfig
                  - codedeploy:RegisterApplicationRevision
                Resource:
                  - '*'
              - Effect: Allow
                Action:
                  - elasticbeanstalk:*
                  - ec2:*
                  - elasticloadbalancing:*
                  - autoscaling:*
                  - cloudwatch:*
                  - s3:*
                  - sns:*
                  - cloudformation:*
                  - rds:*
                  - sqs:*
                  - ecs:*
                Resource:
                  - '*'
              - Effect: Allow
                Action:
                  - lambda:InvokeFunction
                  - lambda:ListFunctions
                Resource:
                  - '*'
              - Effect: Allow
                Action:
                  - cloudformation:CreateStack
                  - cloudformation:DeleteStack
                  - cloudformation:DescribeStacks
                  - cloudformation:UpdateStack
                  - cloudformation:CreateChangeSet
                  - cloudformation:DeleteChangeSet
                  - cloudformation:DescribeChangeSet
                  - cloudformation:ExecuteChangeSet
                  - cloudformation:SetStackPolicy
                  - cloudformation:ValidateTemplate
                Resource:
                  - '*'
              - Effect: Allow
                Action:
                  - codebuild:BatchGetBuilds
                  - codebuild:StartBuild
                Resource:
                  - '*'
              - Effect: Allow
                Action:
                  - cloudformation:ValidateTemplate
                Resource:
                  - '*'
              - Effect: Allow
                Action:
                  - ecr:DescribeImages
                Resource:
                  - '*'
  BuildRole:
    Type: AWS::IAM::Role
    Properties:
      Path: /
      AssumeRolePolicyDocument:
        Version: '2012-10-17'
        Statement:
          - Effect: Allow
            Principal:
              Service: codebuild.amazonaws.com
            Action: sts:AssumeRole
      Policies:
        - PolicyName: BuildPolicy
          PolicyDocument:
            Version: 2012-10-17
            Statement:
              - Effect: Allow
                Resource: '*'
                Action:
                  - logs:CreateLogGroup
                  - logs:CreateLogStream
                  - logs:PutLogEvents
              - Effect: Allow
                Action:
                  - s3:PutObject
                  - s3:GetObject
                  - s3:GetObjectVersion
                  - s3:GetBucketAcl
                  - s3:GetBucketLocation
                Resource:
                  - '*'
              - Effect: Allow
                Action:
                  - codebuild:CreateReportGroup
                  - codebuild:CreateReport
                  - codebuild:UpdateReport
                  - codebuild:BatchPutTestCases
                  - codebuild:BatchPutCodeCoverages
                Resource: '*'
              - Effect: Allow
                Action:
                  - ecr:GetAuthorizationToken
                  - ecr:BatchCheckLayerAvailability
                  - ecr:GetDownloadUrlForLayer
                  - ecr:GetRepositoryPolicy
                  - ecr:DescribeRepositories
                  - ecr:ListImages
                  - ecr:DescribeImages
                  - ecr:BatchGetImage
                  - ecr:InitiateLayerUpload
                  - ecr:UploadLayerPart
                  - ecr:CompleteLayerUpload
                  - ecr:PutImage
                Resource: '*'

  DeployRole:
    Type: AWS::IAM::Role
    Properties:
      AssumeRolePolicyDocument:
        Version: 2012-10-17
        Statement:
          - Effect: Allow
            Principal:
              Service:
                - codedeploy.amazonaws.com
            Action:
              - sts:AssumeRole
      Path: /
      ManagedPolicyArns:
        - arn:aws:iam::aws:policy/AWSCodeDeployRoleForECS

  S3Bucket:
    Type: AWS::S3::Bucket
    # DeletionPolicy: Retain
    Properties:
      BucketName: !Join
        - '-'
        - - artifacts
          - !Ref AWS::Region
          - !Ref AWS::AccountId
          - 'pipeline'
  S3ArtifactBucketPolicy:
    Type: AWS::S3::BucketPolicy
    Properties:
      Bucket: !Ref S3Bucket
      PolicyDocument:
        Statement:
          - Action:
              - s3:PutObject
            Effect: Deny
            Principal: '*'
            Resource:
              - !Sub arn:aws:s3:::${S3Bucket}/*
            Condition:
              StringNotEquals:
                s3:x-amz-server-side-encryption: aws:kms
          - Action:
              - s3:*
            Effect: Deny
            Principal: '*'
            Resource:
              - !Sub arn:aws:s3:::${S3Bucket}/*
            Condition:
              Bool:
                aws:SecureTransport: false
          - Action:
              - s3:Get*
              - s3:Put*
            Effect: Allow
            Principal:
              AWS:
                - !Sub arn:aws:iam::${RepositoryAccountId}:root
            Resource:
              - !Sub arn:aws:s3:::${S3Bucket}/*
          - Action:
              - s3:ListBucket
            Effect: Allow
            Principal:
              AWS:
                - !Sub arn:aws:iam::${RepositoryAccountId}:root
            Resource:
              - !Sub arn:aws:s3:::${S3Bucket}
        Version: 2012-10-17
  Key:
    Type: AWS::KMS::Key
    Properties:
      Description: An example symmetric CMK
      KeyPolicy:
        Version: 2012-10-17
        Id: key-default-1
        Statement:
          - Sid: Enable IAM User Permissions
            Effect: Allow
            Principal:
              AWS:
                - !Sub arn:aws:iam::${AWS::AccountId}:root
            Action: kms:*
            Resource: '*'
          - Sid: Allow administration of the key
            Effect: Allow
            Principal:
              AWS:
                - !Sub arn:aws:iam::${AWS::AccountId}:user/USERNAME
            Action:
              - kms:Create*
              - kms:Describe*
              - kms:Enable*
              - kms:List*
              - kms:Put*
              - kms:Update*
              - kms:Revoke*
              - kms:Disable*
              - kms:Get*
              - kms:Delete*
              - kms:ScheduleKeyDeletion
              - kms:CancelKeyDeletion
            Resource: '*'
          - Sid: Allow use of the key
            Effect: Allow
            Principal:
              AWS:
                - !Sub arn:aws:iam::${RepositoryAccountId}:root
                - !GetAtt PipelineRole.Arn
                - !GetAtt BuildRole.Arn
                - !GetAtt DeployRole.Arn
            Action:
              - kms:DescribeKey
              - kms:Encrypt
              - kms:Decrypt
              - kms:ReEncrypt*
              - kms:GenerateDataKey
              - kms:GenerateDataKeyWithoutPlaintext
            Resource: '*'
          - Sid: Allow attachment of persistent resources
            Effect: Allow
            Principal:
              AWS:
                - !Sub arn:aws:iam::${RepositoryAccountId}:root
                - !GetAtt PipelineRole.Arn
                - !GetAtt BuildRole.Arn
                - !GetAtt DeployRole.Arn
            Action:
              - kms:CreateGrant
              - kms:ListGrants
              - kms:RevokeGrant
            Resource: '*'
            Condition:
              Bool:
                kms:GrantIsForAWSResource: true
  Alias:
    Type: AWS::KMS::Alias
    Properties:
      AliasName: alias/CodePipelineArtifact
      TargetKeyId: !Ref Key
# ------------------------------------------------------------#
# Outputs
# ------------------------------------------------------------#
Outputs:
  BuildRole:
    Value: !GetAtt BuildRole.Arn
    Description: BuildRole Arn
    Export:
      Name: BuildRoleArn
  DeployRole:
    Value: !GetAtt DeployRole.Arn
    Description: DeployRole Arn
    Export:
      Name: DeployRoleArn
  PipelineRole:
    Value: !GetAtt PipelineRole.Arn
    Description: PipelineRole Role Arn
    Export:
      Name: PipelineRoleArn
  Key:
    Value: !GetAtt Key.Arn
    Description: CMK Role Arn
    Export:
      Name: CMKRoleArn
  S3Bucket:
    Value: !GetAtt S3Bucket.Arn
    Description: S3Bucket Arn
    Export:
      Name: S3BucketArn

完了したら、パラメータに使用するため、スタックの出力値を取得しましょう。

2. CodeCommit と CloudWatchEvent の設定 (B)

パイプライン側のAWSアカウント(A) による AssumeRole を許可する権限を追加します。

パイプライン(A)の Source Stage の Action Role にアーティファクトへ保存する権限、アーティファクトを暗号化/復号する権限を追加しています。

CloudWatchEvent によって、パイプライン側のAWSアカウント(A) のイベントバスに送信する設定をしています。

AWSTemplateFormatVersion: 2010-09-09
Description: Step 2, CodeCommit (in Repository Account)
# ------------------------------------------------------------#
# Parameters
# ------------------------------------------------------------#
Parameters:
  NameTagPrefix:
    Type: String
    Default: system
    Description: Prefix of Name tags.
  ProductionAccountId:
    Description: Production Account ID
    MaxLength: 12
    MinLength: 12
    Type: String
  S3BucketArn:
    Description: Production Account S3 Bucket ARN for Artifact (Created by 01-requirement.yml)
    Type: String
  CmkArn:
    Description: Production Account CMK ARN (Created by 01-requirement.yml)
    Type: String
  CodeCommitRepositoryArn:
    Description: CodeCommit Repository Arn
    Type: String
  CodeCommitRepositoryName:
    Description: Repository Account CodeCommit Repository Name (Created by 02-codecommit.yml)
    Type: String
  BranchName:
    Type: String
    Default: master
# ------------------------------------------------------------#
# Resources
# ------------------------------------------------------------#
Resources:
  # CodeWatchEventを実行できるIAMRole
  CloudwatchEventRole:
    Type: AWS::IAM::Role
    Properties:
      RoleName: !Sub ${NameTagPrefix}-CloudWatchEventRole
      AssumeRolePolicyDocument:
        Version: 2012-10-17
        Statement:
          - Effect: Allow
            Principal:
              Service:
                - events.amazonaws.com
            Action: sts:AssumeRole
      Path: /
      Policies:
        - PolicyName: CloudWatchEventsBus
          PolicyDocument:
            Version: 2012-10-17
            Statement:
              - Effect: Allow
                Action: events:PutEvents
                Resource: !Sub arn:aws:events:${AWS::Region}:${ProductionAccountId}:event-bus/default

  # CloudWatchEventの実行ルール
  AmazonCloudWatchEventRule:
    Type: AWS::Events::Rule
    Properties:
      EventPattern:
        source:
          - aws.codecommit
        detail-type:
          - CodeCommit Repository State Change
        resources:
          - Fn::Join:
              - ''
              - - 'arn:aws:codecommit:'
                - !Ref 'AWS::Region'
                - ':'
                - !Ref 'AWS::AccountId'
                - ':'
                - !Ref CodeCommitRepositoryName
        detail:
          event:
            - referenceCreated
            - referenceUpdated
          referenceType:
            - branch
          referenceName:
            - !Ref BranchName
      Targets:
        - Arn: !Sub arn:aws:events:${AWS::Region}:${ProductionAccountId}:event-bus/default
          RoleArn: !GetAtt CloudwatchEventRole.Arn
          Id: codepipeline-AppPipeline

  Role:
    Type: AWS::IAM::Role
    Properties:
      AssumeRolePolicyDocument:
        Version: 2012-10-17
        Statement:
          - Effect: Allow
            Principal:
              AWS:
                - !Sub arn:aws:iam::${ProductionAccountId}:root
            Action:
              - sts:AssumeRole
      Path: /
      Policies:
        - PolicyName: source
          PolicyDocument:
            Version: 2012-10-17
            Statement:
              - Effect: Allow
                Action:
                  - s3:PutObject
                  - s3:PutObjectAcl
                Resource:
                  - !Sub ${S3BucketArn}/*
              - Effect: Allow
                Action:
                  - kms:DescribeKey
                  - kms:GenerateDataKey*
                  - kms:Encrypt
                  - kms:ReEncrypt*
                  - kms:Decrypt
                Resource:
                  - !Ref CmkArn
              - Effect: Allow
                Action:
                  - codecommit:GetBranch
                  - codecommit:GetCommit
                  - codecommit:UploadArchive
                  - codecommit:GetUploadArchiveStatus
                  - codecommit:CancelUploadArchive
                Resource:
                  - !Ref CodeCommitRepositoryArn
# ------------------------------------------------------------#
# Outputs
# ------------------------------------------------------------#
Outputs:
  Role:
    Value: !GetAtt Role.Arn
    Description: CodeCommitRole Arn
    Export:
      Name: CodeCommitRoleArn

完了したら、パラメータに使用するため、CodeCommitRole Arn の出力値を取得しましょう。

3. ECS / Fargate の Blue / Green デプロイを構築 (A)

ここでは、Fargate のBlue / Green デプロイを1発で構築します。

詳細は、CloudFormation 一撃で Fargate の Blue/Green Deployment 環境を構築する | DevelopersIO を参照下さい。

AWSTemplateFormatVersion: '2010-09-09'
Description: Step 3, Fargate Blue/Green Deployment (in Production Account).

Metadata:
  'AWS::CloudFormation::Interface':
    ParameterGroups:
      - Label:
          default: 'Project Name Prefix'
        Parameters:
          - ProjectName
      - Label:
          default: 'InternetALB Configuration'
        Parameters:
          - InternetALBName
          - TargetGroupName1
          - TargetGroupName2
      - Label:
          default: 'Fargate for ECS Configuration'
        Parameters:
          - ECSClusterName
          - ECSTaskName
          - ECSTaskCPUUnit
          - ECSTaskMemory
          - ECSContainerName
          - ECSImageName
          - ECSServiceName
          - ECSTaskDesiredCount
      - Label:
          default: 'Netowork Configuration'
        Parameters:
          - VpcId
          - ALBSecurityGroupId
          - ALBSubnetId1
          - ALBSubnetId2
          - ECSSecurityGroupId
          - ECSSubnetId1
          - ECSSubnetId2
      - Label:
          default: 'Scaling Configuration'
        Parameters:
          - ServiceScaleEvaluationPeriods
          - ServiceCpuScaleOutThreshold
          - ServiceCpuScaleInThreshold
          - TaskMinContainerCount
          - TaskMaxContainerCount
      - Label:
          default: 'CodeDeploy Configuration'
        Parameters:
          - CodeDeployAppName
          - CodeDeployDeploymentGroupName

    ParameterLabels:
      InternetALBName:
        default: 'InternetALBName'
      TargetGroupName1:
        default: 'TargetGroupName1'
      TargetGroupName2:
        default: 'TargetGroupName2'
      ECSClusterName:
        default: 'ECSClusterName'
      ECSTaskName:
        default: 'ECSTaskName'
      ECSTaskCPUUnit:
        default: 'ECSTaskCPUUnit'
      ECSTaskMemory:
        default: 'ECSTaskMemory'
      ECSContainerName:
        default: 'ECSContainerName'
      ECSImageName:
        default: 'ECSImageName'
      ECSServiceName:
        default: 'ECSServiceName'
      ECSTaskDesiredCount:
        default: 'ECSTaskDesiredCount'
      CodeDeployAppName:
        default: 'CodeDeployAppName'
      CodeDeployDeploymentGroupName:
        default: 'CodeDeployDeploymentGroupName'
# ------------------------------------------------------------#
# Input Parameters
# ------------------------------------------------------------#
Parameters:
  NameTagPrefix:
    Type: String
    Default: system
    Description: Prefix of Name tags.

  ProjectName:
    Default: sample-fargate
    Type: String

  #VPCID
  VpcId:
    Description: 'VPC ID'
    Type: AWS::EC2::VPC::Id

  #ALBSecurity Group
  ALBSecurityGroupId:
    Type: AWS::EC2::SecurityGroup::Id

  #ALBSubnet1
  ALBSubnetId1:
    Description: 'ALB Subnet 1st'
    Type: AWS::EC2::Subnet::Id

  #ALBSubnet2
  ALBSubnetId2:
    Description: 'ALB Subnet 2st'
    Type: AWS::EC2::Subnet::Id

  #ECSSecurity Group
  ECSSecurityGroupId:
    Type: AWS::EC2::SecurityGroup::Id

  #ECSSubnet1
  ECSSubnetId1:
    Description: 'ECS Subnet 1st'
    Type: AWS::EC2::Subnet::Id

  #ECSSubnet2
  ECSSubnetId2:
    Description: 'ECS Subnet 2st'
    Type: AWS::EC2::Subnet::Id

  #InternetALB
  InternetALBName:
    Type: String
    Default: 'alb'

  #TargetGroupName1
  TargetGroupName1:
    Type: String
    Default: 'tg1'

  #TargetGroupName2
  TargetGroupName2:
    Type: String
    Default: 'tg2'

  #ECSClusterName
  ECSClusterName:
    Type: String
    Default: 'cluster'

  #ECSTaskName
  ECSTaskName:
    Type: String
    Default: 'task'

  #ECSTaskCPUUnit
  ECSTaskCPUUnit:
    AllowedValues: [256, 512, 1024, 2048, 4096]
    Type: String
    Default: 256

  #ECSTaskMemory
  ECSTaskMemory:
    AllowedValues: [256, 512, 1024, 2048, 4096]
    Type: String
    Default: 512

  #ECSContainerName
  ECSContainerName:
    Type: String
    Default: 'container'

  #ECSImageName
  ECSImageName:
    Type: String
    Default: 'nginxdemos/hello:latest'

  #ECSServiceName
  ECSServiceName:
    Type: String
    Default: 'service'

  CodeDeployAppName:
    Type: String
    Default: 'app'

  CodeDeployDeploymentGroupName:
    Type: String
    Default: 'dg'

  #ECSTaskDesiredCount
  ECSTaskDesiredCount:
    Type: Number
    Default: 1

  # Scaling params
  ServiceScaleEvaluationPeriods:
    Description: The number of periods over which data is compared to the specified threshold
    Type: Number
    Default: 2
    MinValue: 2

  ServiceCpuScaleOutThreshold:
    Type: Number
    Description: Average CPU value to trigger auto scaling out
    Default: 50
    MinValue: 0
    MaxValue: 100
    ConstraintDescription: Value must be between 0 and 100

  ServiceCpuScaleInThreshold:
    Type: Number
    Description: Average CPU value to trigger auto scaling in
    Default: 25
    MinValue: 0
    MaxValue: 100
    ConstraintDescription: Value must be between 0 and 100

  TaskMinContainerCount:
    Type: Number
    Description: Minimum number of containers to run for the service
    Default: 1
    MinValue: 1
    ConstraintDescription: Value must be at least one

  TaskMaxContainerCount:
    Type: Number
    Description: Maximum number of containers to run for the service when auto scaling out
    Default: 2
    MinValue: 1
    ConstraintDescription: Value must be at least one

  CodeDeployRoleArn:
    Description: Production Account CodeDeploy Service Role ARN (Created by 01-requirement.yml)
    Type: String

Resources:
  # ------------------------------------------------------------#
  #  Target Group
  # ------------------------------------------------------------#
  TargetGroup1:
    Type: 'AWS::ElasticLoadBalancingV2::TargetGroup'
    Properties:
      VpcId: !Ref VpcId
      Name: !Sub '${NameTagPrefix}-${ProjectName}-${TargetGroupName1}'
      Protocol: HTTP
      HealthCheckPath: '/'
      Port: 80
      TargetType: ip

  TargetGroup2:
    Type: 'AWS::ElasticLoadBalancingV2::TargetGroup'
    Properties:
      VpcId: !Ref VpcId
      Name: !Sub '${NameTagPrefix}-${ProjectName}-${TargetGroupName2}'
      Protocol: HTTP
      HealthCheckPath: '/'
      Port: 8080
      TargetType: ip

  # ------------------------------------------------------------#
  #  Internet ALB
  # ------------------------------------------------------------#
  InternetALB:
    Type: 'AWS::ElasticLoadBalancingV2::LoadBalancer'
    Properties:
      Name: !Sub '${NameTagPrefix}-${ProjectName}-${InternetALBName}'
      Tags:
        - Key: Name
          Value: !Sub '${NameTagPrefix}-${ProjectName}-${InternetALBName}'
      Scheme: 'internet-facing'
      LoadBalancerAttributes:
        - Key: 'deletion_protection.enabled'
          Value: 'false'
        - Key: 'idle_timeout.timeout_seconds'
          Value: '60'
        - Key: 'access_logs.s3.enabled'
          Value: 'true'
        - Key: 'access_logs.s3.bucket'
          Value: !Sub 'alb-log-${AWS::AccountId}'
      SecurityGroups:
        - !Ref ALBSecurityGroupId
      Subnets:
        - !Ref ALBSubnetId1
        - !Ref ALBSubnetId2

  ALBListener1:
    Type: 'AWS::ElasticLoadBalancingV2::Listener'
    Properties:
      DefaultActions:
        - TargetGroupArn: !Ref TargetGroup1
          Type: forward
      LoadBalancerArn: !Ref InternetALB
      Port: 80
      Protocol: HTTP

  ALBListener2:
    Type: 'AWS::ElasticLoadBalancingV2::Listener'
    Properties:
      DefaultActions:
        - TargetGroupArn: !Ref TargetGroup2
          Type: forward
      LoadBalancerArn: !Ref InternetALB
      Port: 8080
      Protocol: HTTP

  # ------------------------------------------------------------#
  # ECS Cluster
  # ------------------------------------------------------------#
  ECSCluster:
    Type: 'AWS::ECS::Cluster'
    Properties:
      ClusterName: !Sub '${NameTagPrefix}-${ProjectName}-${ECSClusterName}'

  # ------------------------------------------------------------#
  #  ECS LogGroup
  # ------------------------------------------------------------#
  ECSLogGroup:
    Type: 'AWS::Logs::LogGroup'
    Properties:
      LogGroupName: !Sub '/ecs/logs/${NameTagPrefix}-${ProjectName}-ecs-group'

  # ------------------------------------------------------------#
  #  ECS Task Execution Role
  # ------------------------------------------------------------#
  ECSTaskExecutionRole:
    Type: AWS::IAM::Role
    Properties:
      RoleName: !Sub '${NameTagPrefix}-${ProjectName}-ECSTaskExecutionRolePolicy'
      Path: /
      AssumeRolePolicyDocument:
        Version: 2012-10-17
        Statement:
          - Effect: Allow
            Principal:
              Service: ecs-tasks.amazonaws.com
            Action: sts:AssumeRole
      ManagedPolicyArns:
        - arn:aws:iam::aws:policy/service-role/AmazonECSTaskExecutionRolePolicy

  # ------------------------------------------------------------#
  #  ECS TaskDefinition
  # ------------------------------------------------------------#
  ECSTaskDefinition:
    Type: 'AWS::ECS::TaskDefinition'
    Properties:
      Cpu: !Ref ECSTaskCPUUnit
      ExecutionRoleArn: !GetAtt ECSTaskExecutionRole.Arn
      Family: !Sub '${NameTagPrefix}-${ProjectName}-${ECSTaskName}'
      Memory: !Ref ECSTaskMemory
      NetworkMode: awsvpc
      RequiresCompatibilities:
        - FARGATE

      #ContainerDefinitions
      ContainerDefinitions:
        - Name: !Sub '${NameTagPrefix}-${ProjectName}-${ECSContainerName}'
          Image: !Ref ECSImageName
          LogConfiguration:
            LogDriver: awslogs
            Options:
              awslogs-group: !Ref ECSLogGroup
              awslogs-region: !Ref 'AWS::Region'
              awslogs-stream-prefix: !Ref ProjectName
          MemoryReservation: 128
          PortMappings:
            - HostPort: 80
              Protocol: tcp
              ContainerPort: 80

  # ------------------------------------------------------------#
  #  ECS Service
  # ------------------------------------------------------------#
  ECSService:
    Type: AWS::ECS::Service
    DependsOn: ALBListener1
    Properties:
      Cluster: !Ref ECSCluster
      DesiredCount: !Ref ECSTaskDesiredCount
      DeploymentController:
        Type: CODE_DEPLOY
      LaunchType: FARGATE
      LoadBalancers:
        - TargetGroupArn: !Ref TargetGroup1
          ContainerPort: 80
          ContainerName: !Sub '${NameTagPrefix}-${ProjectName}-${ECSContainerName}'
      NetworkConfiguration:
        AwsvpcConfiguration:
          AssignPublicIp: ENABLED
          SecurityGroups:
            - !Ref ECSSecurityGroupId
          Subnets:
            - !Ref ECSSubnetId1
            - !Ref ECSSubnetId2
      ServiceName: !Sub '${NameTagPrefix}-${ProjectName}-${ECSServiceName}'
      TaskDefinition: !Ref ECSTaskDefinition

  # ------------------------------------------------------------#
  #  Auto Scaling Service
  # ------------------------------------------------------------#
  ServiceAutoScalingRole:
    Type: AWS::IAM::Role
    Properties:
      AssumeRolePolicyDocument:
        Statement:
          - Effect: Allow
            Principal:
              Service: application-autoscaling.amazonaws.com
            Action: sts:AssumeRole
      Path: /
      Policies:
        - PolicyName: !Sub '${NameTagPrefix}-${ProjectName}-${ECSContainerName}-autoscaling'
          PolicyDocument:
            Statement:
              - Effect: Allow
                Action:
                  - application-autoscaling:*
                  - cloudwatch:DescribeAlarms
                  - cloudwatch:PutMetricAlarm
                  - ecs:DescribeServices
                  - ecs:UpdateService
                Resource: '*'

  ServiceScalingTarget:
    Type: AWS::ApplicationAutoScaling::ScalableTarget
    Properties:
      MinCapacity: !Ref TaskMinContainerCount
      MaxCapacity: !Ref TaskMaxContainerCount
      ResourceId: !Sub
        - service/${EcsClusterName}/${EcsDefaultServiceName}
        - EcsClusterName: !Ref ECSCluster
          EcsDefaultServiceName: !Sub '${NameTagPrefix}-${ProjectName}-${ECSServiceName}'
      RoleARN: !GetAtt ServiceAutoScalingRole.Arn
      ScalableDimension: ecs:service:DesiredCount
      ServiceNamespace: ecs
    DependsOn:
      - ECSService

  ServiceScaleOutPolicy:
    Type: AWS::ApplicationAutoScaling::ScalingPolicy
    Properties:
      PolicyName: !Sub '${NameTagPrefix}-${ProjectName}-${ECSServiceName}-ScaleOutPolicy'
      PolicyType: StepScaling
      ScalingTargetId: !Ref ServiceScalingTarget
      StepScalingPolicyConfiguration:
        AdjustmentType: ChangeInCapacity
        Cooldown: 60
        MetricAggregationType: Average
        StepAdjustments:
          - ScalingAdjustment: 1
            MetricIntervalLowerBound: 0

  ServiceScaleInPolicy:
    Type: AWS::ApplicationAutoScaling::ScalingPolicy
    Properties:
      PolicyName: !Sub '${NameTagPrefix}-${ProjectName}-${ECSServiceName}-ScaleInPolicy'
      PolicyType: StepScaling
      ScalingTargetId: !Ref ServiceScalingTarget
      StepScalingPolicyConfiguration:
        AdjustmentType: ChangeInCapacity
        Cooldown: 60
        MetricAggregationType: Average
        StepAdjustments:
          - ScalingAdjustment: -1
            MetricIntervalUpperBound: 0

  ServiceScaleOutAlarm:
    Type: AWS::CloudWatch::Alarm
    Properties:
      AlarmName: !Sub '${NameTagPrefix}-${ProjectName}-${ECSServiceName}-ScaleOutAlarm'
      EvaluationPeriods: !Ref ServiceScaleEvaluationPeriods
      Statistic: Average
      TreatMissingData: notBreaching
      Threshold: !Ref ServiceCpuScaleOutThreshold
      AlarmDescription: Alarm to add capacity if CPU is high
      Period: 60
      AlarmActions:
        - !Ref ServiceScaleOutPolicy
      Namespace: AWS/ECS
      Dimensions:
        - Name: ClusterName
          Value: !Ref ECSCluster
        - Name: ServiceName
          Value: !Sub '${NameTagPrefix}-${ProjectName}-${ECSServiceName}'
      ComparisonOperator: GreaterThanThreshold
      MetricName: CPUUtilization
    DependsOn:
      - ECSService

  ServiceScaleInAlarm:
    Type: AWS::CloudWatch::Alarm
    Properties:
      AlarmName: !Sub '${NameTagPrefix}-${ProjectName}-${ECSServiceName}-ScaleInAlarm'
      EvaluationPeriods: !Ref ServiceScaleEvaluationPeriods
      Statistic: Average
      TreatMissingData: notBreaching
      Threshold: !Ref ServiceCpuScaleInThreshold
      AlarmDescription: Alarm to reduce capacity if container CPU is low
      Period: 300
      AlarmActions:
        - !Ref ServiceScaleInPolicy
      Namespace: AWS/ECS
      Dimensions:
        - Name: ClusterName
          Value: !Ref ECSCluster
        - Name: ServiceName
          Value: !Sub '${NameTagPrefix}-${ProjectName}-${ECSServiceName}'
      ComparisonOperator: LessThanThreshold
      MetricName: CPUUtilization
    DependsOn:
      - ECSService
  # ------------------------------------------------------------#
  # Lambda
  # ------------------------------------------------------------#
  LambdaFunction:
    Type: 'AWS::Lambda::Function'
    DeletionPolicy: 'Delete'
    Properties:
      Code:
        ZipFile: |
          import boto3
          import json
          import logging
          import cfnresponse
          from botocore.exceptions import ClientError

          logger = logging.getLogger()
          logger.setLevel(logging.INFO)
          client = boto3.client('codedeploy')

          def lambda_handler(event, context):

              appName = event['ResourceProperties']['appName']
              deploymentGroup = event['ResourceProperties']['deploymentGroup']
              clusterName = event['ResourceProperties']['ECSClusterName']
              serviceName = event['ResourceProperties']['ECSServiceName']

              print('REQUEST RECEIVED:\n' + json.dumps(event))
              responseData = {}
              try:
                res = client.create_application(
                    applicationName=appName,
                    computePlatform='ECS'
                )
                logger.info(res)
                logger.info("SUCCESS: CodeDeploy Application created.")
                res = client.create_deployment_group(
                    applicationName=appName,
                    deploymentGroupName=deploymentGroup,
                    deploymentConfigName='CodeDeployDefault.ECSLinear10PercentEvery1Minutes',
                    serviceRoleArn=event['ResourceProperties']['CodeDeployServiceRoleArn'],
                    autoRollbackConfiguration={
                        'enabled': True,
                        'events': [
                            'DEPLOYMENT_FAILURE',
                        ]
                    },
                    deploymentStyle={
                        'deploymentType': 'BLUE_GREEN',
                        'deploymentOption': 'WITH_TRAFFIC_CONTROL'
                    },
                    blueGreenDeploymentConfiguration={
                        'terminateBlueInstancesOnDeploymentSuccess': {
                            'action': 'TERMINATE',
                            'terminationWaitTimeInMinutes': 30
                        },
                        'deploymentReadyOption': {
                            'actionOnTimeout': 'STOP_DEPLOYMENT',
                            'waitTimeInMinutes': 5
                        }
                    },
                    loadBalancerInfo={
                        'targetGroupPairInfoList': [
                            {
                                'targetGroups': [
                                    {
                                        'name': event['ResourceProperties']['TargetGroup1']
                                    },
                                    {
                                        'name': event['ResourceProperties']['TargetGroup2']
                                    },
                                ],
                                'prodTrafficRoute': {
                                    'listenerArns': [
                                        event['ResourceProperties']['ALBListener1'],
                                    ]
                                },
                                'testTrafficRoute': {
                                    'listenerArns': [
                                        event['ResourceProperties']['ALBListener2'],
                                    ]
                                }
                            },
                        ]
                    },
                    ecsServices=[
                        {
                            'serviceName': serviceName,
                            'clusterName': clusterName
                        },
                    ]
                )
              except ClientError as e:
                  logger.error("ERROR: Something error!")
                  logger.error(e)
                  responseData = {'error': str(e)}
                  cfnresponse.send(event, context, cfnresponse.FAILED, responseData)
              else:
                  logger.info(res)
                  logger.info(
                      "SUCCESS: CodeDeploy Application and DeploymentGroup created.")
                  return cfnresponse.send(event, context, cfnresponse.SUCCESS, responseData)
      Handler: index.lambda_handler
      Role: !GetAtt LambdaRole.Arn
      Runtime: python3.8
      Timeout: 10
  # ------------------------------------------------------------#
  # Custom Resource
  # ------------------------------------------------------------#
  CreateCodeDeploy:
    Type: Custom::CreateCodeDeploy
    DependsOn:
      - ECSService
    Properties:
      ServiceToken: !GetAtt LambdaFunction.Arn
      Region: !Ref AWS::Region
      ECSClusterName: !Sub '${NameTagPrefix}-${ProjectName}-${ECSClusterName}'
      ECSServiceName: !Sub '${NameTagPrefix}-${ProjectName}-${ECSServiceName}'
      CodeDeployServiceRoleArn: !Ref CodeDeployRoleArn
      TargetGroup1: !Sub '${NameTagPrefix}-${ProjectName}-${TargetGroupName1}'
      TargetGroup2: !Sub '${NameTagPrefix}-${ProjectName}-${TargetGroupName2}'
      ALBListener1: !Ref ALBListener1
      ALBListener2: !Ref ALBListener2
      appName: !Sub '${NameTagPrefix}-${ProjectName}-${ECSClusterName}-${ECSServiceName}-${CodeDeployAppName}'
      deploymentGroup: !Sub '${NameTagPrefix}-${ProjectName}-${ECSClusterName}-${ECSServiceName}-${CodeDeployDeploymentGroupName}'
  # ------------------------------------------------------------#
  # IAMRole For CustomResource Lambda
  # ------------------------------------------------------------#
  LambdaRole:
    Type: AWS::IAM::Role
    Properties:
      AssumeRolePolicyDocument:
        Version: '2012-10-17'
        Statement:
          - Effect: Allow
            Principal:
              Service:
                - lambda.amazonaws.com
            Action:
              - sts:AssumeRole
      ManagedPolicyArns:
        - arn:aws:iam::aws:policy/service-role/AWSLambdaBasicExecutionRole
        - arn:aws:iam::aws:policy/AWSCodeDeployFullAccess
  LambdaPolicy:
    Type: AWS::IAM::Policy
    Properties:
      PolicyName: LambdaPolicy
      PolicyDocument:
        Version: '2012-10-17'
        Statement:
          - Effect: Allow
            Action:
              - ec2:*
              - logs:*
            Resource: '*'
          - Effect: Allow
            Resource: '*'
            Action:
              - iam:PassRole
            Condition:
              StringEqualsIfExists:
                iam:PassedToService:
                  - codedeploy.amazonaws.com
      Roles:
        - !Ref LambdaRole
  # ------------------------------------------------------------#
  # Log Bucket
  # ------------------------------------------------------------#
  logsBacket:
    Type: AWS::S3::Bucket
    Properties:
      BucketName: !Sub 'alb-log-${AWS::AccountId}'
      AccessControl: LogDeliveryWrite
      BucketEncryption:
        ServerSideEncryptionConfiguration:
          - ServerSideEncryptionByDefault:
              SSEAlgorithm: 'AES256'
      PublicAccessBlockConfiguration:
        BlockPublicAcls: TRUE
        BlockPublicPolicy: TRUE
        IgnorePublicAcls: TRUE
        RestrictPublicBuckets: TRUE
      LifecycleConfiguration:
        Rules:
          - Id: 'Delete-After-400days'
            Status: Enabled
            ExpirationInDays: 400
  logsBucketPolicy:
    Type: AWS::S3::BucketPolicy
    DependsOn: logsBacket
    Properties:
      Bucket: !Sub 'alb-log-${AWS::AccountId}'
      PolicyDocument:
        Statement:
          - Action:
              - 's3:PutObject'
            Effect: 'Allow'
            Resource:
              - Fn::Join:
                  - ''
                  - - 'arn:aws:s3:::'
                    - !Sub 'alb-log-${AWS::AccountId}'
                    - '/*'
            Principal:
              AWS: '582318560864'
          - Action:
              - 's3:PutObject'
            Effect: 'Allow'
            Resource:
              - Fn::Join:
                  - ''
                  - - 'arn:aws:s3:::'
                    - !Sub 'alb-log-${AWS::AccountId}'
                    - '/*'
            Principal:
              Service: 'delivery.logs.amazonaws.com'
            Condition:
              StringEquals:
                's3:x-amz-acl':
                  - 'bucket-owner-full-control'
          - Action:
              - 's3:GetBucketAcl'
            Effect: 'Allow'
            Resource:
              Fn::Join:
                - ''
                - - 'arn:aws:s3:::'
                  - !Sub 'alb-log-${AWS::AccountId}'
            Principal:
              Service: 'delivery.logs.amazonaws.com'

CodeCommit にプッシュする appspec.yaml, taskdef.json のコンテナ名やタスクロール定義なども構築したリソース名と合わせるように気を付けます。

4. CI/CD Pipeline and Environment と CloudWatchEvent の設定 (A)

CodePipelineは、[2パターン] CFn で Fargate の Blue/Green Deployment の CodePipeline を構築する | DevelopersIOプレースホルダ版 Blue/Green デプロイを参照して下さい。

加えて、リポジトリ側からのイベント受信してパイプラインを実行する CloudWatchEvent を設定しています。

AWSTemplateFormatVersion: 2010-09-09
Description: Step 4, Environment and Pipeline (in Production Account)
# ------------------------------------------------------------#
# Parameters
# ------------------------------------------------------------#
Parameters:
  NameTagPrefix:
    Type: String
    Default: system
    Description: Prefix of Name tags.
  RepositoryAccountId:
    Type: String
    Description: Prefix of RepositoryAccountId tag.
  ServiceName:
    Type: String
    Default: myapp
    Description: Prefix of Service tags.
  CodeDeployAppName:
    Type: String
  CodeDeployDGName:
    Type: String
  ContainerName:
    Type: String
  ECRName:
    Type: String
  CodeCommitRepositoryName:
    Description: Repository Account CodeCommit Repository Name (Created by 02-codecommit.yml)
    Type: String
  BranchName:
    Type: String
    Default: master
  SnsTopicName:
    Type: String
    Default: deploytopic
  ArtifactBucketName:
    Description: Production Account S3 Bucket Name for Artifact (Created by 01-requirement.yml)
    Type: String
  CmkArn:
    Description: Production Account CMK ARN (Created by 01-requirement.yml)
    Type: String
  CodePipelineRoleArn:
    Description: Production Account CodePipeline Service Role ARN (Created by 01-requirement.yml)
    Type: String
  CodeCommitRoleArn:
    Description: Repository Account CodeCommit Action Role ARN (Created by 02-codecommit.yml)
    Type: String
  CodeBuildRoleArn:
    Description: Repository Account CodeBuild Action Role ARN (Created by 02-codecommit.yml)
    Type: String
# ------------------------------------------------------------#
# Parameters
# ------------------------------------------------------------#
Resources:
  # EventBus
  SampleEventBusPolicy:
    Type: AWS::Events::EventBusPolicy
    Properties:
      StatementId: MyStatement
      Statement:
        Effect: Allow
        Principal:
          AWS: !Sub arn:aws:iam::${RepositoryAccountId}:root
        Action: events:PutEvents
        Resource: !Sub arn:aws:events:${AWS::Region}:${AWS::AccountId}:event-bus/default

  # CodeWatchEventを実行できるIAMRole
  CloudwatchEventRole:
    Type: AWS::IAM::Role
    Properties:
      RoleName: !Sub ${NameTagPrefix}-${ServiceName}-CloudWatchEventRole
      AssumeRolePolicyDocument:
        Version: 2012-10-17
        Statement:
          - Effect: Allow
            Principal:
              Service:
                - events.amazonaws.com
            Action: sts:AssumeRole
      Path: /
      Policies:
        - PolicyName: CloudWatchEventsPipelineExecution
          PolicyDocument:
            Version: 2012-10-17
            Statement:
              - Effect: Allow
                Action: codepipeline:StartPipelineExecution
                Resource: !Sub arn:aws:codepipeline:${AWS::Region}:${AWS::AccountId}:${Pipeline}

  # CloudWatchEventの実行ルール
  AmazonCloudWatchEventRule:
    Type: AWS::Events::Rule
    Properties:
      EventPattern:
        source:
          - aws.codecommit
        detail-type:
          - CodeCommit Repository State Change
        resources:
          - Fn::Join:
              - ''
              - - 'arn:aws:codecommit:'
                - !Ref 'AWS::Region'
                - ':'
                - !Ref RepositoryAccountId
                - ':'
                - !Ref CodeCommitRepositoryName
        detail:
          event:
            - referenceCreated
            - referenceUpdated
          referenceType:
            - branch
          referenceName:
            - !Ref BranchName
      Targets:
        - Arn: !Sub arn:aws:codepipeline:${AWS::Region}:${AWS::AccountId}:${Pipeline}
          RoleArn: !GetAtt CloudwatchEventRole.Arn
          Id: codepipeline-AppPipeline

  # CodeBuild
  CodeBuildProject:
    Type: AWS::CodeBuild::Project
    Properties:
      ServiceRole: !Ref CodeBuildRoleArn
      Artifacts:
        Type: CODEPIPELINE
      Source:
        Type: CODEPIPELINE
        BuildSpec: |
          version: 0.2
          phases:
            pre_build:
              commands:
                - echo Logging in to Amazon ECR...
                - $(aws ecr get-login --no-include-email)
                - IMAGE_TAG=$(echo $CODEBUILD_RESOLVED_SOURCE_VERSION | cut -c 1-7)
            build:
              commands:
                - echo Build started on `date`
                - echo Building the Docker image...
                - docker build -t $REPOSITORY_URI:$IMAGE_TAG .
                - docker tag $REPOSITORY_URI:$IMAGE_TAG $REPOSITORY_URI:$IMAGE_TAG
            post_build:
              commands:
                - echo Build completed on `date`
                - echo Pushing the Docker images...
                - docker push $REPOSITORY_URI:$IMAGE_TAG
                - echo Writing imageDetail json...
                - echo "{\"name\":\"${ContainerName}\",\"ImageURI\":\"${REPOSITORY_URI}:${IMAGE_TAG}\"}" > imageDetail.json
          artifacts:
            files: imageDetail.json
      Environment:
        PrivilegedMode: true
        ComputeType: BUILD_GENERAL1_SMALL
        Image: aws/codebuild/standard:4.0
        Type: LINUX_CONTAINER
        EnvironmentVariables:
          - Name: AWS_DEFAULT_REGION
            Value: !Ref AWS::Region
          - Name: REPOSITORY_URI
            Value: !Sub ${AWS::AccountId}.dkr.ecr.${AWS::Region}.amazonaws.com/${ECRName}
          - Name: ContainerName
            Value: !Ref ContainerName
          - Name: DOCKER_BUILDKIT
            Value: '1'
      Name: !Ref AWS::StackName
  # ------------------------------------------------------------#
  # CodePipeline
  # ------------------------------------------------------------#
  Pipeline:
    Type: AWS::CodePipeline::Pipeline
    Properties:
      RoleArn: !Ref CodePipelineRoleArn
      Name: !Sub ${NameTagPrefix}-${ServiceName}-pipeline
      ArtifactStore:
        Type: S3
        Location: !Ref ArtifactBucketName
        EncryptionKey:
          Id: !Ref CmkArn
          Type: KMS
      Stages:
        - Name: Source
          Actions:
            - Name: SourceAction
              ActionTypeId:
                Category: Source
                Owner: AWS
                Version: '1'
                Provider: CodeCommit
              Configuration:
                RepositoryName: !Ref CodeCommitRepositoryName
                PollForSourceChanges: false
                BranchName: !Ref BranchName
              RunOrder: 1
              OutputArtifacts:
                - Name: App
              RoleArn: !Ref CodeCommitRoleArn
        - Name: Build
          Actions:
            - Name: Build
              ActionTypeId:
                Category: Build
                Owner: AWS
                Version: '1'
                Provider: CodeBuild
              Configuration:
                ProjectName: !Ref CodeBuildProject
              RunOrder: 1
              InputArtifacts:
                - Name: App
              OutputArtifacts:
                - Name: BuildOutput
        - Name: Approval
          Actions:
            - Name: Manual_Approval
              ActionTypeId:
                Category: Approval
                Owner: AWS
                Version: '1'
                Provider: Manual
              Configuration:
                CustomData: !Sub '${ServiceName} will be updated. Do you want to deploy it?'
                NotificationArn: arn:aws:sns:ap-northeast-1:{AWS::AccountId}:${SnsTopicName}
        - Name: Deploy
          Actions:
            - Name: Deploy
              ActionTypeId:
                Category: Deploy
                Owner: AWS
                Version: '1'
                Provider: CodeDeployToECS
              Configuration:
                AppSpecTemplateArtifact: App
                AppSpecTemplatePath: appspec.yaml
                TaskDefinitionTemplateArtifact: App
                TaskDefinitionTemplatePath: taskdef.json
                ApplicationName: !Ref CodeDeployAppName
                DeploymentGroupName: !Ref CodeDeployDGName
                Image1ArtifactName: BuildOutput
                Image1ContainerName: IMAGE1_NAME
              RunOrder: 1
              InputArtifacts:
                - Name: App
                - Name: BuildOutput
              Region: !Ref AWS::Region
# ------------------------------------------------------------#
# Outputs
# ------------------------------------------------------------#
Outputs:
  PipelinelogicalID:
    Description: logical ID.
    Value: !Ref Pipeline

CodeCommit のブランチプッシュするとB/Gデプロイが実行されます。

success_pipeline

さいごに

CodePipelineでアカウントをまたいだパイプラインを作成してみる | DevelopersIO でも記載されているように、設定作業はかなり煩雑になります。

GitHub のイベントフックで実行できるのならば、その方が効率的ではあります。

とはいえ、利用する機会も少なくはないと思いますので CloudFormationテンプレートをまとめておきました。

よしなに加工・修正を施して再利用して頂ければと思います。

以上です。

どこかのどなたかのお役に立てば幸いです。

参考

Share this article

facebook logohatena logotwitter logo

© Classmethod, Inc. All rights reserved.